Adjustment By Shifting Cradle
CAUTION:
Always use care when shifting cradle to avoid damaging other components on the vehicle.
- Loosen the four bolts (1) fastening the engine cradle (2) to the frame just enough to allow movement of the cradle.
- Shift cradle as necessary to bring camber or caster into specifications. When shifting cradle, use care not to move other angles (camber or caster) that are within specifications, out of specifications.
- Tighten the four bolts (1) fastening the engine cradle (2) to the frame to the proper torque specifications. Refer to FRAME, TECHNICAL SPECIFICATIONS .
- Jounce the rear, then front of the vehicle an equal amount of times.
- Measure camber and caster. If camber and caster are within specifications, proceed to TOE. If camber or caster cannot be brought into specifications, perform the ADJUSTMENT BOLT PACKAGE INSTALLATION below.