LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Base Brakes (Service Information) >> Electrical >> Switch, Brake Fluid Level >> Removal

Switch, Brake Fluid Level: Removal

GC0170319Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the windshield wiper cowl. Refer to COVER, COWL PANEL, REMOVAL .
  3. Disconnect the brake fluid level sensor wire harness connector (3).
    GC0170380Courtesy of CHRYSLER GROUP, LLC
  4. Remove the brake fluid level sensor (1) from the reservoir by pushing up on the brake fluid level sensor retaining clip (2) and pulling sensor outward.
scientia non olet · About LEMON Manuals