Reservoir, Brake Master Cylinder: Removal
- Remove the brake master cylinder and brake master cylinder reservoir assembly. Refer to MASTER CYLINDER, BRAKE, REMOVAL .
- Thoroughly clean all surfaces of brake fluid reservoir and master cylinder. Use only Mopar® Brake Parts Cleaner or equivalent.CAUTION:
When removing fluid reservoir from the master cylinder, do not pry off using any type of tool. This can damage the fluid reservoir or master cylinder housing.
- Remove screw (3) fastening fluid reservoir to master cylinder housing.
- Rock the brake fluid reservoir side-to-side while pulling up to remove it from seal grommets in master cylinder housing.
- Remove two brake fluid reservoir seal grommets (2) from master cylinder housing (1).
