LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Antilock Brake System (Abs) (Service Information) >> Electrical >> Sensor, Dynamics >> Installation

Sensor, Dynamics: Installation

GC0162409Courtesy of CHRYSLER GROUP, LLC
  1. Install dynamics sensor (1). Tighten the dynamic sensor nuts (3) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  2. Connect the dynamic sensor wiring harness connector (2).
  3. Install floor console. Refer to CONSOLE, FLOOR, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Perform Verification Test and clear any faults.
scientia non olet · About LEMON Manuals