Hinge, Door: Installation

Courtesy of CHRYSLER GROUP, LLC

NOTE:

It is not necessary to remove the door in order to replace the hinges when they are replaces individually.

Position and align the upper and/or lower hinge to the outside face of the A-pillar using the reference marks made when removing, and install the bolts (2, 3).
Install the nuts (1, 3).

Fig 1: Rear Door Hinge Nuts & Bolts Tightening Sequence
Courtesy of CHRYSLER GROUP, LLC
Tighten the fasteners to the proper torque specifications using the sequence shown in illustration. Refer to TORQUE SPECIFICATIONS .