LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Body - Interior & Exterior >> Exterior >> Shield, Splash, Front Wheelhouse >> Installation

Shield, Splash, Front Wheelhouse: Installation

GC0170745Courtesy of CHRYSLER GROUP, LLC
  1. Position the front wheelhouse shield (1) into the front fender well.
  2. Install the 13 push-pin (2) that secure the front wheelhouse shield to the body.
  3. Position the lower front wheelhouse shield (3) onto the body.
  4. Install the push-pins (1) that secure the lower front wheelhouse shield to the front wheelhouse shield (2) and the body.
  5. Install the push-pins securing the sill cladding to the splash shield.
  6. Install the a new rivet (3).
  7. Install the three screws (4).
  8. Install the front wheels Refer to INSTALLATION .
scientia non olet · About LEMON Manuals