DECKLID/Hatch/Liftgate/Tailgate/Swing Gate: Latch: Installation

Courtesy of CHRYSLER GROUP, LLC

Position the decklid latch (3) near the lock cylinder and clip the linkage strap, if equipped.
Install the decklid latch bolts (2) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
Connect the wire harness connector (1).
Connect the negative battery cable.
Verify function of the decklid latch.

Courtesy of CHRYSLER GROUP, LLC
Position the decklid trim cover (3) and install the push fasteners (4).
NOTE:
The manual trunk release handle must be routed through the deck trim cover.
Install the pull handle (2).

Courtesy of CHRYSLER GROUP, LLC
Position the hinge cover (2) and install the push fasteners (1).