Glass, Door: Installation
- Insert the rear door glass (1) into the carrier plate cavity, lift the glass and tape the glass to the door header.
- Install the rear door carrier plate. Refer to PLATE, CARRIER, INSTALLATION .
- Install the outside door handle.
- With the help of an assistant holding the glass, remove the tape securing the glass, lower and align the glass with the regulator tab.
- Engage the window regulator tab into the glass.
- Apply a clear adhesive patch or equivalent to the front window regulator access hole.
- Close the latch access panel.
- Reinstall the inner belt weatherstrip onto the rear door.
- Reinstall the trim panel onto the inside of the rear door. Refer to PANEL, REAR DOOR TRIM, INSTALLATION .