LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body - Interior & Exterior >> Interior >> Panel, Rear Shelf >> Installation

Panel, Rear Shelf: Installation

GC0170820Courtesy of CHRYSLER GROUP, LLC
  1. Feed the rear seat belt through the opening in the rear shelf panel (2).
  2. Position the rear shelf trim on the rear shelf, then push the rear shelf panel rearward to engage the retaining hook.
  3. Install the two push fasteners (1).
  4. Install the rear seat belt anchor. Refer to RETRACTOR, SEAT BELT, INSTALLATION .
  5. Install the upper C-pillar trim panels. Refer to PANEL, C-PILLAR TRIM, INSTALLATION .
scientia non olet · About LEMON Manuals