LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Body - Interior & Exterior >> Doors - Rear >> Latch, Door >> Installation

Latch, Door: Installation

GC0170648Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Front door latch shown in illustration, rear door latch similar.

  1. Connect the handle and lock cables (1).
    GC0170713Courtesy of CHRYSLER GROUP, LLC
    2. NOTE:

    Front door latch shown in illustration, rear door latch similar.

  2. Install the cover and seat the latch cover retaining tabs (3) fully.
  3. Install the latch onto the presenter bracket and seat the fully.
  4. Connect the electrical connector (2).
  5. Install the rear door carrier plate (2), Refer to PLATE, CARRIER, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  7. Perform the Clear/Relearn procedure. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals