Foot Rest, Floor, Front: Removal
- Remove the cowl side trim from the driver side. Refer to PANEL, COWL TRIM, REMOVAL .
- Remove the push fasteners that secure the driver side front carpet to the cowl side inner panel and the front door sill.
- Pull the front floor carpet up and away from the foot rest (1) far enough to access and remove the nut (2).
- Lift the base of the foot rest upward far enough to disengage the tab (3) at the top of the foot rest from the slot (4) in the dash panel.
- Turn the foot rest (3) over and disconnect the wire harness connector (1), if equipped.
- Remove the foot rest.
