Possible Causes
| Possible Causes |
|---|
| NON-FCC COMPLIANT COMPONENTS |
| SENSOR IDS NOT DOWNLOADED INTO TIRE PRESSURE MONITORING (TPM) MODULE |
| INCORRECT TIRE PRESSURE MONITORING (TPM) SENSOR IDS |
| TIRE PRESSURE MONITORING (TPM) SENSOR |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .
NOTE:
In the Scan Tool under Data "FF" is the default value. If this value is displayed, the Tire Pressure Monitoring (TPM) Module has not been programmed.