Telematics Mirror
- Disconnect and isolate the negative battery cable.
- Using a small flat bladed tool, release the clips (2) on each side of the upper mirror trim (1) and rotate the upper mirror trim downward to remove.
- Using a small flat bladed tool, release the tabs (2) and lower the lower mirror trim and remove.
- The lower mirror trim (2) is shown removed in the illustration, pry both tabs (1) outward to release.
- Disconnect the wire harness connector (2) from the mirror.
- Grasp the mirror (1) by the base and rotate it clockwise approximately 90 degrees and remove.
