Body - Interior & Exterior: Hood: Hood: Installation

NOTE:

The Vehicle Emission Control Information (VECI) label(s) must be in place for the life of the vehicle. When replacing the component to which the VECI label is adhered, a new VECI label must also be adhered to the new component.

Courtesy of CHRYSLER GROUP, LLC

With assistance from a helper, position the hood (1) onto the hood hinges (5) and loosely install the bolts (2).
Align the hood with the reference mark made previously and tighten the hood hinge to hood bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Clip the windshield washer hose and wire harness (4) to the hood (1).
Connect the windshield washer hose to the connectors (2).
Connect the wire harness connectors (3).
Install the hood silencer and push fasteners.
Verify proper hood latch operation and fit of hood. Adjust if necessary. Refer to GAP AND FLUSH, SPECIFICATIONS .