LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Body - Interior & Exterior >> Interior >> Mirror, Rearview >> Installation >> Installation >> Prismatic Mirror

Prismatic Mirror

  1. Place the rear view mirror onto the mirror button.
  2. Grasp the mirror by the base and rotate it approximately 90 degrees counter-clockwise until the mirror locks into place.
    NOTE:

    The mirror must be fully seated onto the button before rotating.

  3. Connect the wire harness connector to the mirror.
  4. Install the harness cover.
  5. Connect the negative battery cable.