Body - Interior & Exterior: Sunroof: Sunroof: Installation

Courtesy of CHRYSLER GROUP, LLC

1. With the help of an assistant, position the sunroof (3) into the vehicle and loosely install the sunroof to body bolts (4). Make sure the seal around the perimeter of the sunroof glass is seated evenly around the roof opening.
2. Tighten the sunroof to body bolts to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
3. Attach the front drain tubes (1) to the sunroof.
4. Attach the rear drain tubes (2) to the sunroof.
5. Raise and install the headliner. Refer to HEADLINER, INSTALLATION .
6. Check the sunroof glass clearances and adjust if necessary. Refer to GLASS, SUNROOF, ADJUSTMENTS .
7. Re-initialize the sunroof motor. Refer to MOTOR, SUNROOF, STANDARD PROCEDURE .