Seat Back, Front: Installation

Courtesy of CHRYSLER GROUP, LLC

Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, FRONT, WARNING .
Install the seat back onto the adjuster and install the bolts (2). Tighten to proper torque specifications. Refer to TORQUE SPECIFICATIONS .
NOTE:
Before tightening the front seat back bolts, make sure the wire harness routing is correct.
Pull the cushion trim string (1) and hook it onto the seat back frame.
From under the seat, route the wiring harness and connect the harness connectors.
Install the side shields. Refer to SIDE SHIELDS, SEAT CUSHION, FRONT, INSTALLATION .
Install the front seat back panel. Refer to PANEL, SEAT BACK, INSTALLATION .
Install the front seat into the vehicle. Refer to SEAT, FRONT, INSTALLATION .