Spacer - Shelf Panel Subwoofer

Courtesy of CHRYSLER GROUP, LLC

NOTE:

This spacer is used only for vehicles equipped with a 25.4 centimeter (10 inch) diameter subwoofer mounted on the package shelf panel. The spacer is mounted between the package shelf panel and the subwoofer.

Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
Remove the subwoofer from the spacer on the package shelf panel. Refer to SPEAKER, REMOVAL .
Remove the four screws (1) that secure the spacer (2) to the shelf panel support.
Remove the spacer from the shelf panel.