LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Installation >> Front Door Panel

Front Door Panel

GC0144687Courtesy of CHRYSLER GROUP, LLC
  1. Support the speaker (2) while reconnecting the wire harness connector. Do not let the speaker hang from the wire harness.
  2. Position the speaker onto the front door hardware module carrier.
  3. Install and tighten the four screws (1) that secure the speaker to the front door hardware module carrier. Tighten the screws securely.
  4. Reinstall the trim panel onto the inside of the front door. Refer to PANEL, DOOR TRIM, INSTALLATION .
  5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
scientia non olet · About LEMON Manuals