Module, Radio Antenna: Removal: Module
- Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
- Remove the trim from the upper right C-pillar (1). Refer to PANEL, C-PILLAR TRIM, REMOVAL .
- Disconnect the body wire harness connector (4) from the antenna module (2).
- Remove the screw (3) that secures the antenna module to the C-pillar.
- Disengage the mounting tab of the antenna module from the slotted hole in the C-pillar and remove the module from the vehicle.