Rear Door Panel
- Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
- Remove the trim panel from the inside of the rear door. Refer to PANEL, REAR DOOR TRIM, POLICE, REMOVAL .
- Remove the two screws (1) that secure the speaker (2) to the inside of the rear door.NOTE:
Support the speaker while disconnecting the wire harness connector. Do not let the speaker hang from the wire harness.
- Pull the speaker away from the door far enough to access and disconnect the wire harness connector from the speaker.
- Remove the speaker from the rear door.
