LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Installation >> Instrument Panel

Instrument Panel

GC0170256Courtesy of CHRYSLER GROUP, LLC
  1. Position the speaker (2) near the mounting hole in the top of the instrument panel structural support (1).
  2. Reconnect the wire harness connector to the speaker and position it into the mounting hole of the instrument panel.
  3. Install and tighten the two screws (3) that secure the speaker to the instrument panel structural support. Tighten the screws securely.
  4. Reinstall the defroster grille onto the top of the instrument panel. Refer to GRILLE, DEFROSTER, INSTALLATION .
  5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
scientia non olet · About LEMON Manuals