Solenoid, Variable Valve Timing (VVTS), Exhaust: Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

Lubricate the Variable Valve Timing Solenoid (VVTS) rubber O-ring seal with clean engine oil.
Install the VVTS and rotate into position.

Courtesy of CHRYSLER GROUP, LLC
Install the VVTS (3) retaining bolt (2) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .
Connect VVTS electrical connector (1).
Install intake manifold. Refer to MANIFOLD, INTAKE, REMOVAL .